Warpath WIP 10

This build is taking a lot of work. I just hope this will turnout nice when its done...I'm not sure if I can finish this before the year end, probably early next month.

Added rivets all over using pins.

Warpath WIP 9

Update time.. Added spikes on the shoulders and also on the hand.

Warpath WIP 8

I was thinking of what weapon to give my gouf aside from the ax. I decide to scrap build a Gatling gun for it. Its no my first time to make Gatling gun, I did it way back for my Dynames Custom. I used balloon sticks, pvc pipes, spure and some other scraps. Its still not finish and I will add some details on it. I also made a Heat Rod using twist ties. And as for the ax I'm also going to add more details on it...

Warpath WIP 7

Just a little update. I added some detail on the chest. Its inspired by Gear Zulu. I also scarp built an ax made from a sprue and a CD. Its not done and its still on early stage, I'll probably redesign it as I go on. Still needs a lot of clean up.

Warpath WIP 6

Its been weeks since my last update. First off, I decided  to change the name of my Gouf. It will now be called  "Warpath".

Added armor on the left arm and shoulder. I used an SD helmet and some armor part from my scraps. I added spikes on the chest but I'm not sure if I'll keep it.. The tubes on the chest is from a used gel pen and wire. Still a lot of work needed for this build.

Warpath WIP 5

Redesigned the body to make it look more like a Gouf. Modified the head also to have the angry look..Still needs more sanding and touch ups..

Warpath WIP 4

Redesign the spine. The old one doesn't look very good  so I decided to try a new one. Made from balloon stick and wire. Also made minor changes on the skirts. 

Warpath WIP 3

Applied epoxy putty on the legs, added  foot guard, shoulder armor side, back and front skirts using HIPS. The skirts are not yet final and I'll gonna redesign the shoulder armor, I'll make it a bit bigger. I'm inspired by HowardKhor's GOUF and I'll probably base this on his build. Sorry for the blurry pics...

Warpath WIP 2 (Gouf SD scrap)

Just got back from a holiday trip. Here are some big update on the SD gouf scrap build. I will now name this as The Ravager. I made an articulated hand for the first time, its made from balloon stick, sprue and paper clips. Special thanks to MatX, I got inspired by his scratch build hand tutorial. And also to MAC member Zorox, I was also inspired by his WIP by using a huge arm on his 1/144 Bushido.

Gouf SD Scrap WIP

I started this couple weeks ago. I have some SD scraps lying around and I thought of bashing them together. The parts are from an SD gouf grappler, SD freedom, SD destiny hand, SD nu arm and some keroro parts. I want to make this a muscular hulk looking SD.

I Got Some HGUC Today

Today I bought some HGUC, Geara Zulu and Zgok Experiment.  This is actually my second Zgok Experiment. I love the design very much that I bought another one. No plans of modding this kits yet since I still have some wips to finish.

Vintage 1/144 Victory Dash Gundam

I got this kit a while back. I was kinda lazy on working on my work in progress so I decided to snap fit this old 1/144 kit.

Samurai Z

Finally its done!!! Sorry for the delay, I was kinda busy this past few days. I was supposed to do a simple base but I decided  to postpone it and do it some other time since I don't have any idea what to do. Anyways here are the pictures.

Samurai Z WIP 9

Washed and weathered using tamiya enamel black. Gonna clean it up more a bit.

Samurai Z WIP 8

Painted. I used tamiya flat red, chrome silver, flat white and gold. Gonna apply enamel wash and a little weathering next.

Samurai Z WIP 7

Primed. Still thinking what colors to use.

The Junkbots: Kriz WIP

This is for my friend kriz of KrizKreations. I promise him a couple months back to name a junkbot after him. This is my simple thank you for the good things he done for me, inspiring me with his comments and supporting my works especially for starting the Concept Mecha Group Build. I want to make this just like my my first junkbot. I hope I he liked it..=)

The Junkbots: Microbots

After months since my last completed work in progress, I manage to finish another one. I thought this build would be quicker to finish but its actually the longest, since i kinda lost interest working on any of my wips this past months. Anyways here are the pics. A giant junkbot head where the microbots lives.

Microbots WIP 5

Painted and applied rust. Sorry for the messy background... I can probably finish this today.



Thanks for looking...=)

Microbots WIP 4

Finally got the time to work on my wips this afternoon. Here is an update on a Junkbot wip, the last time i worked on this was back on April. Added cables and primed...Sorry for the blurry pics...

Samurai Z WIP 6

Its been almost a month since my last work in progress update. I kinda lost my drive to work on my wips, but now I'm back and gonna work again... First off here is an update on my Samurai Z.

MAC 1st Anniversary!

For the first time I finally meet my bros from MAC forums face to face. It was actually my first time to talk to other modelers in person since I started this hobby. I arrived late because we made a wrong turn lol, but manage to locate Don’s(DC23) place after an hour. I first saw Don and kisapmata then Don introduced me to the guys and I received a warm welcome with applause. I was so nervous I don’t know what to do and was so speechless I can’t even say a word. Thank you so much guys!!!I also meet MatX, vanz, fil and TVA, they are really nice. Sadly I wasn't able to take a lot of pictures and I had to leave early. But I wont forget this event ever and what made it sweeter, Don gave me a Sinanju SD!!! Thank you very much!!!  

Samurai Z WIP 5

Its been weeks since my last update, been busy with other things and really didn't work on model kits this past few days. I don't want to rush this project, so I just  take my time and work on it when I'm in the mood. Here are some update. I replaced the legs using some parts from my sd scraps and added cables as usual.

Samurai Z WIP 4

Here are some modifications I made on the body. Added a koto part, wires and gears..

Samurai Z WIP 3

Made some modifications on the head. Modded the eye, trimmed and drilled holes, added gears, wires and added a pony tail lol. Special thanks to my brother for making the pony tail for me, it was supposed to be simple but he made a better one for me. Its made from twisty ties. Here are the pics.

Samurai Z WIP 2

Here are some new updates, Im really in the mood on working on this kit!.. I made an arm from sprues, added a koto part and cables. Trimmed the armor and added gears on it and also drilled some holes.
 

Samurai Z WIP 1

I'm now back on working on an SD kit. I'll be modifying this Tyouhi sangoukoden into a cyborg samurai themed SD.  My plan is to drill holes, add wires and trim the armor and make it look like a zombie cyborg/terminator. Here are the pics...

The Junk Bots: Interceptor

After months of not finishing a build, I  finally manage to finish a new one. This build started way back late January. I'm glad I was able to finish this before the group build deadline. As usual like all my junkbot, this is rusty and dirty. I wanted a more dynamic pose so I decided to make it look like its jumping.  Added a smoke effect too using cotton. Its good to finish this and hope to finish one more if possible. here are the pics.

The Dark Knight Rises Teaser Poster

I was watching the IGN daily fix this morning and saw this teaser poster for the next batman movie. I'm a big batman fan and I loved Christoper Nolan's batman films especially the dark knight. So I am excited for the next movie the dark knight rises. I like the teaser poster very much, its like Inception, which is a movie i loved also.

More info on: IGN

Thanks for looking...=)

The Junk Bots: Interceptor WIP 6

Almost done with this junkbot, just a little touch up and its ready for taking pics... For now here is a little teaser.



That is all for now. Thank you for looking!...=)

One Year!

Today marks the first anniversary of my little blog. It’s been fun sharing my humble works to everyone. I would like to thank all the readers for having time to drop by and comment, Thank you guys very much! Thank you to Mech Arts Community for the support, especially to DC23 for featuring my works on his blog. Thanks to Kriz of KrizKreations for he is one of the people who appreciated my works on my early days on MAC and started a Group Build inspired by my Junkbots. Thanks to MatX,Kamm  for being a buddy sharing ideas, and all the my MAC bros! Thank you guys very much!... And of course thanks to my wife for supporting my hobby…  Hope to get back on modeling fully again soon…  Again thank you from the bottom of my heart!... =)

Thank you for looking!=)

Fun with My Phone's Camera

Just want to share some pics I took yesterday using my phone. Edited using android little photo.

The Junk Bots: Interceptor WIP 5

Just a little update. Primed and ready for painting. I'll probably wont paint this just yet since its raining today. I hope to finish this soon..

The Junk Bots: Interceptor WIP 4

After a month of no update here is one for my junkbot. Im glad that the deadline for the MAC CONCEPT MECHA GROUP BUILD is extended, that gives me more time to finish all my junkbot or possibly make more.
Anyways here an update for my junkbot bike.

Dallas Mavericks 2011 NBA Champions!!!!!!!!!

After a long long long time of being a Mavs fan, finally they won a championship!!! I'm a Mavs fan since my high school days  around early 2000s. I stick with them through thick and thin, through disappointment of past seasons. I saw them lose on finals 06 and this time they won erasing the bad memory of 2006 finals... I'm very happy for the Mavericks espicially to Dirk who never left the team and gave it his all. Very deserving win and being the finals most valuable player...

Going back to model kits soon. thank you for visiting.=)

The Junk Bots: Eclipse

Another addition to my junkbots and entry mac concept mech group build. I stated this last January and got shelved for a couple of months. Now its done and I'm happy with the outcome.

Keroro

I made this yesterday afternoon. This is a very quick build and nothing really extraordinary.  I just wanted to paint something, so I went for keroro since I have a couple keroro kits that is not painted. Its not perfect but I guess its better than an unpainted kit and I enjoyed painting it. I made the stars from pla-plates  instead of using the stickers and I cut a thin cardboard for the eyes.

The Junkbots Eclipse WIP 2

I was thinking of what WIP to finish first and I thought of finishing this since I haven't updated it for months. Its already primed and I made a simple base as always.

I Got Char's Counterattack SD Set

I got this yesterday. This is an old sd kit set  with not much articulation, but hey they still look cute.. I'll snapbuild this little guys as soon as I get home.

Boltex Machine Wallpapers

I made this a couple months back around February. Just a simple wallpaper featuring my Junkbots icons. Its not really that great but I just wanted to share it to everyone.

click to enlarge

New Look

I kinda got tired on the look of my blog so I decided to change it. Nothing really special just a simple blue and silver theme. That is all for now. Thank you for looking...=)

Snap built Newtype's Mobile Armor SD

Another old sd kit of mine. This kit only comes in one color as you can see, though sticker is included I decided not to apply it yet. I'll just probably paint this one like my old Byg Zam SD.

Microbots WIP 3

I decided to make a junk bot head dio base for my microbots. I got inspired by DC23's Turn A Head Diorama so I decided to make one for this little guys. Sorry for the messy background..

HG 1/144 O Gundam Real Type

    This is my second HG 1/144 O Gundam. I made this early January this year.  I did not post this right away because I was not very satisfied with the finish. But last week when I got some tamiya enamel paint, I tried doing enamel wash on it. I usually use semco acrylics for all my washes. I liked the outcome and will probably use enamel from now on.  Also after I made the base for my Punk Bot, I liked the design so much I decide to make another one with the same idea. here are the pics.

Snap built Gundam Mk-II Titans SD

Got in the mood of taking some pics today. I snap built this a month or two ago. Cute little SD kit and have some decent articulation for an old SD.

The Junk Bots: Punk Bot

After a long long time I finally  finish a Junk bot again. This build is inspired by my friend Kamm after jokingly challenge me to build a bot from, sharpener, toothbrush, padlock, etc.  I also made as simple platform base from, a cd case, yakult bottles cut in half, plastic leftovers and cables. This is not on-scale with my other junkbots, its bigger and taller. I have 3 more junk bot wips I need to finish and hopefully finish them all soon. anyways here are the pics.

EUROPE GUNPLA CUP 2011

Mech Arts Community will be hosting the 1st Europe Gunpla Cup and will be sponsored by Hobby Link Japan. For more info check out DC23' site.

Gundam X WIP 4

Hi everyone!..Its been awhile since my last update, been busy with other things this past few days. Here some progress on the gundam x. Made some modifications on the legs and arms. Added plastic plates on the arms and legs to make it look boxy. I had a hard time working on the legs, Im not really good in working on  a 100 scale kit specially with this old HG but i think it looks ok so far..  Still pretty rough and more work needs to be done.  Sorry about the blurry pics, I use my cellphone to take photos...

MAC Forums Anniversary Wallpaper Contest: Kanpei and Kochu

Another wallpapers I made today. Made from my kanpei and kochu sd kits.

click to enlarge

click to enlarge

Thank you for looking...=)